| Normen | ||
|---|---|---|
| IEEE 802.2 | ISO 8802.2 | LLC (logical link control) |
| IEEE 802.3 | ISO 8802.3 | 10MBit MAC (Media Access Control) und Physical layer |
| IEEE 802.12 | 100BaseVG-AnyLAN | |
| IEEE 802.30 | 100BaseT | |
| Buszugriffsprotokoll | |
|---|---|
| CSMA/CD | Carrier Sense Multiple Access / Collision Detection |
| Arten | ||||
|---|---|---|---|---|
| 10Base5 | Thickwire | 10MBit/s | 500m Segmente | |
| 10Base2 | Thinwire | 10MBit/s | 185m Segmente | |
| 10BaseT | Twisted Pair | 10MBit/s | 100m Segmente, Hubs | |
| 100BaseT | ||||
| 100BaseTX | 2paarig | 100MBit/s | 100m Segmente, Hubs | |
| 100BaseT4 | 4paarig | 100MBit/s | 100m Segmente, Hubs | |
| 100BaseFX | Glasfaser | 100MBit/s | ||
| 100BaseVG | VoiceGrade, 4paarig | 100MBit/s | 100m Segmente, Hubs | |
| Repeater Regel | ||
|---|---|---|
| Zwischen je zwei Stationen dürfen nie mehr als 4 Repeater (2 wenn auf die Linksegmente verzichtet wird bzw. bei 100BaseT) plaziert sein | ||
| Trunksegment | Segment mit Stationen / Repeatern | |
| Linksegment | Segment mit 2 Repeatern aber keinen Stationen | |
| Anzahl der Stationen |
|---|
| maximal 100 Stationen bzw. Repeater pro Segment bei 10Base5 |
| maximal 30 Stationen bzw. Repeater pro Segment bei 10Base2 |
| maximal 1024 Stationen pro Ethernet-Netzwerk |
| Frameformate | |
|---|---|
| Ethernet II | Hauptsächlich IP |
| Ethernet 802.3 | Hauptsächlich Novell IPX (alt) |
| Ethernet 802.2 | Hauptsächlich Novell IPX (neu) |
| Ethernet SNAP | Hauptsächlich Appletalk |
| Größe in Byte | Inhalt |
|---|---|
| 7 | Präambel (AAHEX..AAHEX) |
| 1 | Start Frame Delimiter (SFD) (ABHEX) |
| 6 | Zieladresse |
| 6 | Quelladresse |
| 2 | Typ |
| 46..1500 | Daten (inkl. Protokolle höherer Schichten) |
| 4 | FCS (Frame Checking Sequence) |
| Größe in Byte | Inhalt |
|---|---|
| 7 | Präambel (AAHEX..AAHEX) |
| 1 | Start Frame Delimiter (SFD) (ABHEX) |
| 6 | Zieladresse |
| 6 | Quelladresse |
| 2 | Länge |
| 46..1500 | Daten (inkl. Protokolle höherer Schichten) |
| 4 | FCS (Frame Checking Sequence) |
| Größe in Byte | Inhalt |
|---|---|
| 7 | Präambel (AAHEX..AAHEX) |
| 1 | Start Frame Delimiter (SFD) (ABHEX) |
| 6 | Zieladresse |
| 6 | Quelladresse |
| 2 | Länge |
| 1 | DSAP (Destination Service Access Point) |
| 1 | SSAP (Source Service Access Point) |
| 1 | Control Byte 1 |
| 1 | Control Byte 2 (Optional) |
| 43(42)..1497 (1496) | Daten (inkl. Protokolle höherer Schichten) |
| 4 | FCS (Frame Checking Sequence) |
| DSAP | Ziel im darüberliegenden Protokoll |
| SSAP | Quelle aus dem darüberliegenden Protokoll |
| Control Byte 1 | Control Byte 2 | ||||||
|---|---|---|---|---|---|---|---|
| Länge | 1 | 1 | 2 | 1 | 3 | 1 | 7 |
| Info | 0 | N(S) | P | N(R) | |||
| Supervisor | 1 | 0 | SF | XXXX | P | N(R) | |
| Unnumbered | 1 | 1 | MM | P | MMM | ||
| N(S) | Sendefolgenummer |
| N(R) | Empfangsfolgenummer |
| P | Poll/Final-Bit (Poll..Befehl; Final..Antwort) |
| SF | Supervisorfunktion |
| XXXX | Reserviert (0000) |
| MM(M) | Modifikationsbit (Befehle bzw. Antworten) |
| Größe in Byte | Inhalt |
|---|---|
| 7 | Präambel (AAHEX..AAHEX) |
| 1 | Start Frame Delimiter (SFD) (ABHEX) |
| 6 | Zieladresse |
| 6 | Quelladresse |
| 2 | Länge |
| 1 | DSAP (Destination Service Access Point) |
| 1 | SSAP (Source Service Access Point) |
| 1 | Control Byte 1 |
| 3 | Protocol-ID (Organization Code) |
| 2 | Protocol-ID |
| 38..1492 | Daten (inkl. Protokolle höherer Schichten) |
| 4 | FCS (Frame Checking Sequence) |